The
New 4-LITESTRIP
AVAILABLE
IN 120 & 240
VOLTS |
A SLICE OF LIGHT
SOFT
CONTROLLED LIGHT
THE
NEW BARGER LITESTRIPS
|
 |
Just what is
needed in a backlight.
Since the
Chimera strip is only 16 inches
high you can
place the LITESTRIP backlight
where it is needed and not
be in the shot. With one
of the available grids you
have the light control
needed.
Place one behind /
over the camera, add the grid
of choice, switch on the bulbs
needed, and there is a selective
slice of light.
Need a soft slice of
light for a key without all
the flagging? Select the
degree of light control needed via
the grid and you have the soft
light on the subject’s
faces and not on their clothing.
|
| |
|
|
 |
|
 |
COMPACT - The
4-LITESTRIP is only 23 inches
wide x 16
inches high x 11.25 inches
deep. The 4-LS 2 PC uses
four 650 watt 120 volt lamps
(FRK) or 240 volts. Allowing
it to work vertical as well as
horizontal. It has
the same reflector and tray design
as the V2 standard models with
more light out the front and
more heat out the rear. The speed
ring is built in . |
|
Safety
screen is hinged on the bottom
with three 1/4 turn fasteners
on top to facilitate bulb changes. |
 |
|
 |
| The
4-LITESTRIP is 16 inches high x
11.25 inches deep. From
the top to the bottom of
the pin is 21 inches. The
weight is less than 22
pounds. |
|
From the
back of the light to the front
of a medium Chimera is 26 inches. |
 |
|
 |
The front
of the 4-LITESTRIP with a
medium Chimera is 49 inches
wide. With four 650 watt 120
volt (FRK) bulbs or 240 volt
(FRM) bulbs or 230 volt (FRL)
bulbs at 500 ASA at 1/50th
of a second, you get a F8
at 5 ft., F4 at 10 ft. and
F2.8 at 15ft.. |
|
As with
all Barger-Lites you get the
same tall switch guards, the
same double pole switches to
adjust light levels, and the
same rugged, heat resistant
wood handles. |
 |
|
 |
You can
now tuck the Chimera side flaps
in the convenient flap holders
to control spill light. |
|
Super
durable and light weight front
cover protects the safety screen
and bulbs when in transit. |
 |
|
 |
When space is
at a premium the combo pin
provides the flexability to
use a baby light stand or a
grip C stand.
|
|
Same better steel
lock washer improving the
same great lock off strategy
with a large easy to grip
handle and a linear bearing
to reduce friction when tightening.
|
 |
|
|
| Same
wider reflectors for better
light distribution and
vented to keep the bulb seals
cooler for longer life. |
|
A
finned socket holder design
helps radiate heat away from
the socket and bulb seal
area. |
 |
|
 |
| Chimera has
designed a new inproved vent setup that
allows the hot air
to escape increasing the
life of the 4-LITESTRIP while
controling light spill on
the set . |
|
On the
240 volt version the
3 power cables (CE) come
ready to install the preferred
regional plug. |
 |
|
 |
A Combo pin can be used to
offset the light by placing
it in the side of the bail.
|
|
For
more control / flexability
a large grip head with a baby
/ junior adaptor
pin can be used. This
will allow for tilting and
changing angles at the same
time. |
 |
|
|
A
90 degree adapter like this
one from Modern used
for Image 80 Kinos is
also a way to go vertical. |
|
|
| PHOTOMETRICS |
The 4-LITESTRIP
with four 650 watt, 120 volt
FRK/240 volt FRM/230 volt FRL
500 ASA @ 24 fps |
| Distance (in feet) |
5 |
10 |
15 |
| F-stop |
8 |
4 |
2.8 |
|
