The
New 6-LITESTRIP
AVAILABLE
IN 120 & 240
VOLTS |
A SLICE OF LIGHT
SOFT
CONTROLLED LIGHT
THE
NEW BARGER LITESTRIPS
|
 |
Just what is
needed in a backlight.
The front screen is only 22
inches high you can
place the 6-LITESTRIP backlight
where it is needed and not
be in the shot. With one
of the available grids you
have the light control
needed.
Place one behind /
over the camera, add the grid
of choice, switch on the bulbs
needed, and there is a selective
slice of light.
Need a soft slice of
light for a key without all
the flagging? Select the
degree of light control needed via
the grid and you have the soft
light on the subject’s
faces and not on their clothing.
|
| |
|
|
 |
|
 |
COMPACT - The
6-LITESTRIP is only 34 inches
wide x 16
inches high x 12 inches
deep. The 6-LS 3 PC uses
six 650 watt 120 volt lamps (FRK)
or 240 volts. Allowing
it to work vertical as well as
horizontal. It has
the same reflector and tray design
as the V2 standard models with
more light out the front and
more heat out the rear. The speed
ring is built in . |
|
Safety
screen is hinged on the bottom
with three 1/4 turn fasteners
on top to facilitate bulb changes.
|
 |
|
 |
| The
6-LITESTRIP is only
16 inches high x 11.25 inches
deep. The top of the light
to the bottom of the pin is
only 21 inches. The entire
light only weighs 22 pounds. |
|
From the
back of the light to the
front of a large Chimera is
31 inches. |
 |
|
 |
The front
of the 6-LITESTRIP with a
large Chimera is 72 inches
wide by 22 inces high. With
six 650 watt 120 volt (FRK)
bulbs/240 volt (FRM) bulbs/230
volt (FRL) bulbs at 500 ASA
@ 24 fps @ 1/50th of a second,
you get a F8 at 5 ft., F4.5
at 10 ft. and F3.5 at 15 ft.. |
|
As with
all Barger-Lites you get the
same tall switch guards, the
same double pole switches to
adjust light levels, and the
same rugged, heat resistant
wood handles. |
 |
|
 |
You can
tuck the Chimera side
flaps in the convenient flap
holders to control spill light. |
|
Super
durable and light weight front
cover protects the safety screen
and bulbs when in transit. |
 |
|
 |
| When space is
at a premium the combo pin
provides the flexability to
use a baby light stand or a
grip C stand. | |
Same better steel
lock washer improving the
same great lock off strategy
with a large easy to grip
handle and a linear bearing
to reduce friction when tightening. |
 |
|
|
| Same
wider reflectors for
better light distribution
and vented to keep the bulb
seals cooler for longer life. |
|
A
finned socket holder design
helps radiate heat away from
the socket and bulb seal
area. |
 |
|
 |
Chimera has designed
a new improved vent setup that
allows hot air to
escape increasing the life
of the 6-LITESTRIP while controling
spill light on the set.
|
|
On
the 240 volt version the
3 power cables (CE) come
ready to install the preferred
regional plug. |
 |
|
 |
| In 120 or 240 volt versions
a 19 pin Socopex connector
is available. |
|
For
a vertical liner the combo
pin can be used to offset the
light by placing it in the
side of the bail in one of
the existing holes. |
 |
|
 |
For
more control / flexability
a large grip head with a
baby / junior adaptor
pin can be used. This
will allow for tilting and
changing angles at the same
time. |
|
A 90 degree
adapter like this one from
Modern used for Image 80 Kinos is
also a way to go vertical. |
| PHOTOMETRICS |
The 6 LITESTRIP
with six 650 watt, 120 volt FRK/240
volt FRM/230 volt FRL
500 ASA @ 24 fps @ 1/50th of
a second |
| Distance (in feet) |
5 |
10 |
15 |
| F-stop |
8 |
4.5 |
3.5 |
|
